Do you have a cracked or broken tooth? Possibly you bite hard on a candy or ice and you noticed that a piece of your tooth has chipped off. You need not panic, there are faster ways to get your broken tooth fixed.
The tooth enamel is supposed to be the hardest tissue in the body. Nevertheless, it has limited strength. A sudden bite down on something hard, a hard blow on the face, or falling can cause your tooth/teeth to chip or break, especially if you have dental caries in some teeth.
Fastest Cracked Teeth Treatment
If you have a fractured, chipped, or broken tooth, consult your dentist immediately. Otherwise, you stand the chance of damaging your tooth further. The tooth may become infected and you may eventually lose the tooth.
Once you notice a broken tooth, you should take the following self-care measures before you get to your dentist:
- Take acetaminophen or any other over-the-counter pain reliever if you experience severe pain in the tooth. Rinse your mouth with salty water.
- If the affected tooth has a sharp or jagged edge that may cut your tongue, your cheek, or your lip, cover the surface of the tooth with sugarless chewing gum or a piece of wax paraffin.
- If you must eat after the incidence, make sure that you take only soft foods and try as much as possible not to bite down on the broken tooth.
There are several cracked teeth treatments for a chipped or broken tooth. The appropriate cracked teeth treatment for you will depend largely on how severe the tooth damage is. For instance, if only a small part of your tooth is broken off, the dental treatment can be done in just a single dental visit. While a severely broken or damaged tooth may require a costly and lengthier dental treatment. Here are some faster ways to fix your broken or chipped tooth:
Dental Bonding or Filling
This is the fastest, easiest and most affordable dental treatment for a broken or chipped tooth. However, this treatment is usually for minor dental damage. For instance, if only a small part of your tooth enamel is broken or chipped off, your dentist may quickly repair this dental damage with a dental filling. However, if this damage is done to your front tooth or the affected tooth can be easily seen when you smile, your dentist will likely repair this with dental bonding procedure, which uses a tooth-coloured composite resin.
Typically, dental bonding is a fast and simple dental treatment procedure that may or may not require numbing the affected tooth. To apply dental bonding to the affected tooth, your dentist would first roughen the surface of the affected tooth with a gel or liquid in order to make the bonding material adhere easily to it. Your dentist would then apply an adhesive material to the affected tooth followed by the tooth-coloured composite resin. Your dentist would shape and sculpt the bonding material to perfectly mimic a natural tooth. After this, your dentist would use a special light to cure (harden) the composite material.
This dental treatment is more expensive than dental bonding treatment and takes a little more time. Veneers can make your chipped or broken tooth to look whole and healthy again. Veneers are thin shells of tooth-coloured composite resin or porcelain material that are attached to the surfaces of the affected teeth to cover the whole front of the teeth. Dental veneers work just like how an acrylic nail covers the fingernail. Veneers have thicker sections to replace the chipped part of the tooth.
To place the dental veneer, your dentist needs to first prepare your tooth. He or she would remove about 0.3 to 1.2 mm of enamel from your tooth surface. This is to allow room for the veneer to be placed. Your dentist would then make an impression of the affected tooth. This impression would be sent to the dental lab to make the veneer. It takes at most 2 weeks for the veneer to be ready. Once the veneer is ready, you would have to go back to the dental office to have the veneer placed.
Just like in dental bonding, your dentist would first roughen the surface of the affected tooth with a gel or liquid before applying a special cementing material to the veneer. Your dentist would then place the veneer onto the surface of the prepared tooth. After setting the veneer perfectly in place, your dentist would use a special light to cure the cementing material to make it harden quickly.
Dental Crown or Cap
This dental treatment option is more expensive than the two options above. It also requires more time for the treatment procedure to be completed. This treatment option is required for major dental damages. For instance, if a large part of your tooth is chipped or broken off or if your tooth is affected by dental decay, your dentist would file away or grind part of the remaining tooth and then cover it with a dental crown.
Dental crown is a tooth-shaped cap that protects the tooth and improves its appearance. Dental crowns may be made with different materials – all ceramic, all resin, porcelain fused with metal, and all metal, etc. – each of these materials has its benefit. All metal crowns are usually the strongest while the resin and porcelain crowns look more like the natural tooth.
Dental crown treatment usually requires two dental visits. During the first dental visit, your dentist takes an impression an X-rays of your tooth to check its roots and surrounding jawbone as well as to determine if there is any further problem. If there is no other problem, your dentist would use local anaesthesia to numb the affected tooth and its surrounding gum before removing part of the remaining tooth to make room for the dental crown.
If the chip has caused a large part of your tooth to be missing, a filling material may be necessary to build up the tooth in order to support the dental crown. Your dental crown would be made in the lab according to the impressions previously taken. Before the permanent crown is made, your dentist may attach a temporary dental crown made of acrylic or thin metal.
The second visit is usually 2 or 3 weeks later. During this visit, your dentist will remove the temporary dental crown, check how the permanent crown would fit and then cement the permanent crown in place permanently. Due to the advancement in dental technologies, some dental offices can use some special digital milling tools to make a dental crown on the first visit without taking an impression.
Even if your entire tooth breaks off, as long as the gingival tissue and jawbone remain intact, fixing the dental crown is possible. Your dentist would need to perform dental implant surgery to insert a dental post into your jawbone, which will become a solid structure onto which a dental crown can be placed. The dental implant procedure is often the most expensive dental treatment for a chipped or broken tooth of all the treatment options listed above.
Do you have a chipped or broken tooth? You would need to consult a professional dentist who will determine the appropriate dental treatment for your case. If you need the service of a professional dentist or need a well-experienced dentist to provide answers to your questions on the fastest ways to fix cracked teeth, visit Sugarland Dental today.